卷簾門算是現代防火設備當中應用比較廣泛的一種消防設施，因其耐火限度高，耐腐蝕等優勢特點受到了廣大群眾的青睞。但有時卷簾門也會出現一些故障，那么卷簾門出現故障之后如何檢測故障呢？下面濟南卷簾門廠家為您解答。

Rolling shutter door is a kind of fire protection equipment widely used in modern fire protection equipment. Because of its high fire resistance, corrosion resistance and other advantages, it is favored by the masses. But sometimes the rolling shutter door also has some faults. How to detect the faults after the rolling shutter door has faults? Now the manufacturer of Jinan roller shutter door will answer for you.

在維修中，還經常接觸通電后的某些元素等集成器件穩定性建CC，防雷管，變壓器，二極管，感覺溫度是否正確，如快速加熱，溫度高，無短路故障電路可以識別壞設備。

During maintenance, I often contact some elements after power on and other integrated devices to ensure the stability of CC, lightning protection tube, transformer, diode, and feel whether the temperature is correct, such as rapid heating, high temperature, and no short circuit fault circuit can identify bad equipment.

應仔細檢查是否有元器件在電路板上的損傷。如組件故障，頭發黃，固定針松動，接觸，設備連接錯誤等。廠家表示有經驗的維修人員會根據用戶提供的相關信息和故障現象，正確地觀察問題，迅速找到故障。一些接觸可以是否光暗觀察可疑元件產生火花的確定。

Carefully check whether there is any damage of components on the circuit board. Such as component failure, yellow hair, loose fixed needle, contact, wrong equipment connection, etc. The manufacturer said that experienced maintenance personnel would correctly observe the problem and quickly find the fault according to the relevant information and fault phenomenon provided by the user. Some contacts can be used to determine whether the spark generated by the suspect component can be observed in light or dark.

在電路的輸入或輸出，連接和控制模式逐漸清晰的系統電路。例如：一個電路的主控制板右電機關閉無輸出，產生異常關閉。檢測，先用交流電壓等級的措施，終沒有輸出功率，從而控制終端連接繼電器找到，然后測量繼電器線圈是否與相應的控制電壓;如由線圈的控制端，可以找到更好的控制電路等等，可以迅速找出故障元件，并排除。

The input or output of the circuit, connection and control mode of the system circuit are gradually clear. For example, there is no output when the right motor of the main control board of a circuit is closed, resulting in an abnormal shutdown. Test: firstly, measure the AC voltage level, and there is no output power, so the control terminal is connected to the relay to find out, and then measure whether the relay coil is connected with the corresponding control voltage; For example, better control circuits can be found at the control end of the coil, and fault components can be quickly found and eliminated.

卷簾門控制系統大多采用電磁繼電器作為控制器，繼電器觸點開關會產生明顯的“滴答”聲。作為無聲，在確定繼電器驅動電機無故障，可以確定繼電器壞。

The roller shutter control system mostly uses electromagnetic relay as the controller, and the relay contact switch will produce an obvious "tick" sound. As silent, it can be determined that the relay is broken after confirming that there is no fault in the relay drive motor.

以上就是卷簾門出現問題后的檢測方法，當然，在實際應用過程中，我們會遇見各種各樣的問題，這時候我們要冷靜處理，順藤摸瓜，找出問題的原因!關注我們http://m.santoncc.cn，了解更多事項！

The above is the detection method after the rolling shutter door has problems. Of course, in the actual application process, we will encounter various problems. At this time, we should calm down and find out the cause of the problem! Follow us http://m.santoncc.cn , learn more!